Yayın tarihi için İnşaat Bölümü listeleme
Toplam kayıt 42, listelenen: 1-20
-
Temperature effects and shrinkage properties of clay
(2003)A study of temperature effects and shrinkage properties of three clays was reported. The clay properties were studied using XRD, DTA, and TG analysis. The correlation between the volume change and temperature, depended on ... -
The utilization of sepiolite in landfill liners
(2005)In this study, sepiolite and natural soil-added sepiolite mixtures were studied to find out whether they can be used as compacted landfill liner, as they are an economic alternative to the other compacted clay liners or ... -
Properties of fly ash-FGD gypsum-lime based products
(2006)Bricks were produced by using six different combinations of fly ash, flue gas desulphurization gypsum and lime with the addition of 10 wt% water. The products were shaped by means of pressure forming process. The bricks ... -
Recycling of thermal power plant bottom ashes
(2006)Beneficiation of unburned carbon was conducted in order to increase the possibility of the recycling of coal fired power plant bottom ashes. Two stage flotation techniques were used for this study. In the flotation experiments ... -
Calibration/validation of satellite derived snow products with in situ data over the mountainous eastern part of Turkey
(2007)This paper presents the critical issues for the comparison of the parameters that optical remote sensing can deliver (snow-covered area and albedo as MODIS products) with snow survey and lately established automated weather ... -
E-business transformation stages for construction companies
(2007)The business world is continuously changing due to the advances and developments in technology. Innovations in technology change all the industries and the way of performing business activities. E-Business (E-b) has created ... -
A preliminary research on the properties of lightweight expanded clay aggregate
(2008)In the present study, lightweight expanded clay aggregates were produced from clay, waste brick powders, albite floatation waste, and coal at various temperatures ranged from 900 °C to 1250 °C. After the production, the ... -
Effect of pore forming agent on the properties of lightweight expanded clay aggregate
(2008)Lightweight expanded clay aggregates (LECA) were produced by using clay, coal, perlite, and bottom ash. Aggregates were shaped by means of pelletizing. After preparation, the rounded aggregates were treated for various ... -
An experimental investigation on fly ash based geopolymer bricks
(2008)Geopolymer bricks were produced by using F type fly ash, C type fly ash, sodium hydroxide solution, sodium silicate solution by means of pressure forming process. Then, the geobricks were heat treated at the temperature ... -
Impacts of cultural differences on project success in construction
(2009)In today's constantly changing global business environment, understanding cultures have become essential and a prerequisite for business success. Understanding and successfully managing cultural differences can provide ... -
HEC-HMS model application in Yuvacik Dam reservoir, Turkey
(2009)Since 1999 the Yuvacik Dam reservoir has been one of the most important arteries supplying water to the city of Kocaeli, located in the southeastern part of the Marmara region of Turkey. Although considered to be a large ... -
Construction professionals' perspectives on cross-cultural training for international construction projects
(2010)Cross-cultural training has long been recognized as an effective method to facilitate cross-cultural interaction. Many global organizations provide cross-cultural training to their expatriates to increase productivity in ... -
Contact angle measurements on lignite surface
(2010)Froth flotation has been widely used for cleaning and desulfurisation of coals for many decades all over the world. There is a close relationship between floatability of minerals and contact angle. Therefore surface ... -
Information technology usage impacts on construction projects' success
(Vilnius Gediminas Technical University, 2010)Information technology (IT) plays an important role for improving business processes and has significant effects on project time, cost and quality in the construction industry. Effective use of IT may increase construction ... -
Damage assessment and mortar identification in Beylerbeyi palace
(2010)The historical building stock and seismic risk of Anatolia draws considerable attention of the engineers for studying the construction techniques and the earthquake performance of these structures. This study is dealing ... -
Effect of compaction method on mechanical behavior of graded aggregate base materials
(2012)Previous studies indicated that the properties of aggregates and their compaction process are the most important factors in the design of granular highway base layers. It was argued that the conventional compaction method ... -
An experimental comparison between the shear and the plane waves by using resonant column test
(2012)The resonant column device is commonly used in laboratory to determine the dynamic properties of soils. During the resonant column test, a soil specimen is excited under torsional excitation at different frequencies. In ... -
An experimental study on the evaluation of concrete test results
(2012)The compressive strength test applied to standard samples is one of the most important tests indicating the quality of concrete in structures. The results of the standard tests are compared with the values used in design ... -
Augmented reality system applications in construction project activities
(2013)The firms in construction industry could not sufficiently adapt the rapidly emerging information technologies in recent years into their corporate structures. Therefore, in an effort to further exploit the benefits of ... -
Deformation induced dynamic loading for different soil types
(Civil-Comp Press, 2013)Earthquakes can cause different deformations for different soil types and different earthquake characteristics. Deformations caused by earthquakes can be given as follows: surface rupture, regional subsidence, slope ...
