Yayın tarihi için İnşaat Bölümü listeleme
Toplam kayıt 42, listelenen: 21-40
-
Cartoons on occupational health and safety: Semiotic analysis of workers
(Association of Researchers in Construction Management, 2014)Construction industry is at the top rankings in developed and developing countries in terms of occupational deaths and injuries. This shows that legal regulations themselves could not decrease occupational accidents. In ... -
Effects of shear wall ratio on the seismic behavior of buildings having inadequate seismic resistance
(Earthquake Engineering Research Institute, 2014)Use of low concrete strength (in some structures as low as 8-10 MPa), structural irregularities, poor detailing in members are some of the significant parameters causing inadequate seismic resistance of deficient RC ... -
Analytical study on the seismic performance of a RC building with structural wall during the May 19, 2011 Simav, Turkey Earthquake
(Earthquake Engineering Research Institute, 2014)Previous studies imply that, after the recent destructive earthquakes reinforced concrete (RC) buildings having structural walls showed better seismic performance than RC buildings in which seismic loads are fully resisted ... -
Modelling of shear strength paramaters of saturated clayey soils
(GEOMATE International Society, 2014)Shear strength of a soil can be defined as the maximum shear stress that can resist by the internal forces of the soil. Shear strength must be determined to solve the soil stability problems. The shear strength parameters ... -
Evaluation of the mechanical performance of recycled concrete aggregates used in highway base layers
(American Society of Civil Engineers (ASCE), 2014)Concrete waste is one of the most abundant waste materials and remains in the environment for a long period of time, which, if not recycled, can significantly reduce the life of municipal landfill facilities. The use of ... -
Stress - Strain characteristics of frozen silty and clayey soils
(International Society of Offshore and Polar Engineers, 2015)Presence of ground water is a serious problem for cohesive soils in many geotechnical projects. Ground water decreases the bearing capacity of soil layer. However, water can be used as a cementitious material in case of ... -
The influence of micro- And nano-filler content on the mechanical properties of epoxy composites
(Assoc. of Mechanical Eng. and Technicians of Slovenia, 2015)In this study, the influence of micro- And nano-filler content on the mechanical properties of epoxy composites was studied. The matrix material is epoxy; the micro-fillers are Al2O3, TiO2 and fly ash added in 10 wt% to ... -
Characterization of lightweight ferrocement panels containing expanded perlite-based mortar
(Elsevier Sci LTD, 2015)In this study, the deflection and cracking of lightweight ferrocement panels (LFPs) containing expanded perlite based mortar (EPBM) was investigated. For this purpose, twelve LFPs with one or two layers of wire mesh were ... -
3D modeling of a river type dam fish passage by CFD
(CRC Press/Balkema, 2016)Computational Fluid Dynamics (CFD) models provide comprehensive information about the fluid flow around water structures. This paper discusses the CFD solution of a pool type fish passage model and evaluate the results in ... -
Combining pedotransfer functions and scaling for describing the soil hydraulic characteristics of the Kurukavak basin, Turkey
(International Multidisciplinary Scientific Geoconference, 2017)Hydrological process modeling is used to predict the contribution from rainfall-runoff, infiltration, groundwater recharge and evaporation. For this, information related to the interception and movement of water within the ... -
Conversion of CruTS 3.23 data and evaluation of precipitation and temperature variables in a local scale
(EDP Sciences, 2017)The precipitation and temperature data obtained from the last version 3.23 of Climate Research Unit Time Series (CruTS) data are evaluated in a local scale. The data obtained for the period 1901-2014 consists of ten climate ... -
The Antecedents and Consequences of Consumer Engagement in Social Networking Sites
(Int Business Information Management Assoc-Ibima, 2017)Consumer engagement is increasingly becoming one of the important issues in the competitive business environment. Both researches and practitioners are focusing on how consumer engagement can be enhanced through different ... -
Analyzing trend and developing an empirical formula for estimating rainfall intensity: A case study Eskisehir city, Turkey
(EDP Sciences, 2017)Trend and stationarity analysis conducted for the city center of Eskisehir province, Turkey. The Intensity- Duration - Frequency (IDF) curves and formulas for the estimation of the design rainfall intensity have been ... -
A laboratory investigation for shear modulus of silty sand soils
(Avestia Publishing, 2017)Dynamic shear modulus gives information about dynamic soil response and deformability characteristics. Dynamic shear modulus of the soils can be determined by using field tests or laboratory experiments such as resonant ... -
The Importance of Geological Conditions' Effects on Construction in Landscape Planning in Turkey
(Springer International Publishing Ag, 2018)The development of the majority of the cities in Turkey from the point of urbanization were occurred without regard to the effects of the geological conditions of the region that were founded in the past. The settlement, ... -
Assessing the tensile capacity of cold-formed steel connections using self-drilling screws and adhesive materials
(Insight Society, 2018)This paper presents a review of the proposed design for assessing the tensile capacity of a simply truss framing system of cold-formed steel. A series of connection tests were made to investigate the capacity of connections ... -
An Overview of Urban Transformation Applications in Eskisehir (Turkey) After the 1999 Earthquakes
(Springer International Publishing Ag, 2018)Cities transformed by their own socio-cultural, economic, political and technological processes from their existed period. An urban transformation project should be planned from a variety of angles such as physical, economic, ... -
A stochastic model for the capacity estimation of non-seismically designed beam-column joints
(Czech Technical University, 2018)An analytical model based on nonlinear fracture mechanics was employed to evaluate the shear capacity of a substandard beam-column joint retrofitted by externally applied post-tensioned bars. The strength of the reference ... -
A Review on the Effect of Environmental Conditions on Concrete Evaporation and Bleeding
(Springer International Publishing Ag, 2018)The formation of plastic shrinkage crack increases on the fresh concrete placed in hot and windy conditions. The cracks affect the durability of the concrete in a negative way. This type of cracking is mostly seen on slabs, ... -
Performance of Steel Slag and Fly Ash Added Soil as Subbase Materials
(Springer International Publishing Ag, 2018)The steel industry, which is an indicator of the developed countries with its production, also brings the problem of waste together. This waste product, that differs depending on the production process and is called slag, ...