Ara
Toplam kayıt 448, listelenen: 1-10
Effect of Kaolin Type on Pyroplastic Deformation of Sanitaryware Porcelain Body
(Gazi University, Fac Engineering Architecture, 2016)
Pyroplastic deformation is one of the major problems of sanitaryware production, because of high temperature firing and high amount of glassy phase and this problem can be reduced by controlling of amount of glassy and ...
Effect of the Particle Size of Hard Raw Materials on Physical Properties of Sanitaryware Porcalain
(Gazi University, Fac Engineering Architecture, 2011)
Sanitaryware porcelain is a kind of a group of glassy porcelains called "vitreous china". The raw materials quartz sand and feldispar used for production of these porcelains are hard materials. It is well known that particle ...
Preparation of cordierite ceramics from talc with boron oxide addition
(2004)
Thermal reactions of impure materials of talc, silica and alumina with moderate particle sizes were investigated to obtain a dense cordierite ceramic by boron oxide addition as a sintering aid. Mixed powders were uniaxially ...
The production of Ni and co-gahnite pigments using ZnO powder produced from metal slags
(Korean Assoc Crystal Growth, Inc, 2010)
In this study, Ni and Co-gahnite pigments were produced from Al2O3 powder and ZnO powder obtained from industrial metal slags. Different pigment compositions were prepared by adding metal oxides (NiO or Co3O4) and mineralisers ...
Roll pressing of sodium perborate monohydrate
(2006)
Sodium perborare monohydrate (SPM) is produced by calcining 3 moles of water of sodium perborate tetrahydrate with fluidized bed dryer. In fluidized bed dryer, the powders of the sodium perborate monohydrate are sucked by ...
Application of syenite as a raw material and its effects on the physical characteristics of the ceramic structure of floor tile
(Trans Tech Publications LTD, 2004)
Syenite has been used as a fluxing agent in floor tile ceramic compositions. The raw material of syenite has an important role to the regulation of furnace performances, due to its lowering of the melting point and its ...
Electrophoretic deposition of ZnO thin film in aqueous media
(Springer, 2004)
In thin films, controlled porous structures are desired for certain ceramic gas sensors. The aim of this study was to fabricate ZnO coated substrates starting with aqueous suspensions with electrophoretic deposition ...
?/ß SiAlON based composites incorporated with MoSi2 for electrical applications
(2010)
Electrically conductive ?-ß SiAlON composites containing 30 vol. % MoSi2 was prepared by gas pressure sintering (GPS). The effect of sintering atmosphere on phase formation, grain growth, mechanical and electrical properties ...
Influence of Deposition Technique on Growth and Resistivity of Ta/NiFe Nano Films.
(Int Union Crystallography, 2009)
…
Electrophoretic coating of hydroxyapatite-boron nitride nanocomposites on titanium implants
(Taylor and Francis Inc., 2015)
Titanium (Ti) and its alloys have long been used as implant materials in dental and orthopedic applications. However, they can suffer certain disadvantages, such as poor osteoinductive properties and low corrosive-wear ...