Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorEren, Gültekin, Elif
dc.contributor.authorKurama, Semra
dc.date.accessioned2019-10-18T19:02:51Z
dc.date.available2019-10-18T19:02:51Z
dc.date.issued2012
dc.identifier.isbn9789400707221
dc.identifier.issn2211-0844
dc.identifier.urihttps://dx.doi.org/10.1007/978-94-007-0723-8_55
dc.identifier.urihttps://hdl.handle.net/11421/10868
dc.description.abstractThe main point of this work is the optimization of ultrasonic methods for the non-destructive testing of sintered porcelain tiles containing defects. Zirconia and steel balls of different diameter and rubber with different thicknesses were imbedded in porcelain tile granules before pressing. After being sintered at 1473 K, the tiles were inspected using ultrasound. This method may allow defect detection using an A-scan. It can be observed that the amplitude of the back wall echo for a defective part is smaller than for a part without defects. Depending of the size, shape and position of the defect, a defect peak can be observed. An immersion pulse-echo C-scan was used to differentiate defects. The shape and place of the defects can be defineden_US
dc.language.isoengen_US
dc.relation.isversionof10.1007/978-94-007-0723-8_55en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectA-Scanen_US
dc.subjectC-Scanen_US
dc.subjectDefecten_US
dc.subjectPorcelain Tileen_US
dc.subjectUltrasonicen_US
dc.titleDefect detection in porcelain tiles using ultrasounden_US
dc.typearticleen_US
dc.relation.journalRILEM Bookseriesen_US
dc.contributor.departmentAnadolu Üniversitesien_US
dc.identifier.volume6en_US
dc.identifier.startpage381en_US
dc.identifier.endpage386en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.contributor.institutionauthorKurama, Semra


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster