Ara
Toplam kayıt 35, listelenen: 21-30
Empirical equations to estimate non-linear collapse of medium-length cylindrical shells with circular cutouts
(Elsevier Sci LTD, 2017)
This paper examines the load bearing capacity of medium-length steel cylindrical shells with a circular cutout under the action of axial compression. Numerical simulations were performed for a radius-to-thickness ratio ...
Three autoregressive-neural network hybrid models for energy efficiency estimation of induction motors
(Emerald Group Publishing LTD, 2019)
Purpose - Improvements on the energy efficiency of the induction motors bear on not only these motors but also on the whole industry as a result of preference of these types of motors. In recent projects, energy efficiency ...
Effect of Riveting on the Joint Strength of Adhesively Bonded Double Lap Joints
(2018)
The scope of this study is to determine the effectiveness of using rivets in the adhesive joints in order to combine plastic-based composite materials which are often used in today's engineering structures, to the joint ...
A computational study of cyclic thermal response of shape memory alloy thin-film island structures
(Springer Wien, 2017)
With a view toward contributing to the state of the art in the research on shape memory alloy memory storage devices, the thermal response of a shape memory alloy (SMA) thin film during a complete cycle of heating and ...
Reliability Evaluation of Dynamic Characteristics of Clean Sand Soils Based on Soft Computing Methods
(Springer Heidelberg, 2016)
This study was conducted to estimate the dynamic characteristics of clean sand under low strains using fuzzy expert systems and neural network approximations. A series of resonant column tests were conducted on clean sand ...
Experimental investigation of machining characteristics and chatter stability for Hastelloy-X with ultrasonic and hot turning
(Springer London LTD, 2018)
Ultrasonic-assisted machining is a machining operation based on the intermittent cutting of material which is obtained through vibrations generated by an ultrasonic system. This method utilizes low-amplitude vibrations ...
High performance fabrics in body protective systems
(Trans Tech Publications Ltd, 2017)
High performance fabrics are preferable for armor systems due to their lightweight structure and flexibility. High performance fabrics are generally used in body armor design for personal protection. However, these fabrics ...
The ballistic performance of aramid based fabrics impregnated with multi-phase shear thickening fluids
(Elsevier Sci LTD, 2017)
Single-phase shear thickening fluids (STFs) have been extensively investigated in body protective applications. However, researchers do not have long-standing past experience of multi-phase STFs in protection. In the present ...
Oxidation and thermal shock behavior of thermal barrier coated 18/10CrNi alloy with coating modifications
(Korean Soc Mechanical Engineers, 2017)
In this study, substrates of 18/10CrNi alloy plates were initially sprayed with a Ni-21Cr-10Al-1Y bond coat and then with an yttria stabilized zirconia top coat by plasma spraying. Subsequently, plasma-sprayed Thermal ...
A GPR Spectral-Based Processing Method for Minimisation of Concrete Sleepers Effects in Railway Ballast Investigations
(Institute of Electrical and Electronics Engineers Inc., 2018)
This paper investigates the influence of concrete railway sleepers on the ground-penetrating radar (GPR) signal for the assessment of railway ballast conditions. The main aim of this study is to propose a data processing ...