Ara
Toplam kayıt 35, listelenen: 11-20
A risk analysis model for mining accidents using a fuzzy approach based on fault tree analysis
(Emerald Group Publishing LTD, 2018)
Purpose Risk analysis is a critical investigation field for many sectors and organizations to maintain the information management reliable. Since mining is one of the riskiest sectors for both workers and management, ...
Systematical Review on the Numerical Simulations of Laser Powder Bed Additive Manufacturing
(Yildiz Technical University, 2018)
Additive manufacturing technologies, depending on melting of metal powder particles layer upon layer for building 3D functional objects, have widened their application area within biomedical, automotive, aerospace and ...
Springback Behavior of AA6082T6 Tubes in Three-point Bending Operation
(Elsevier Science BV, 2017)
Springback is an inevitable phenomenon in bending operations. For the geometrical accuracy in manufacturing, springback should be predicted and a required compensation should be applied to the operation. The numerical ...
Dynamic Properties of Clean Sand Modified with Granulated Rubber
(Hindawi LTD, 2018)
Waste automobile tires are used as additives or replacements instead of traditional materials in civil engineering works. In geotechnical engineering, tires are shredded to certain sizes and mixed with soil, especially ...
The effects of cryogenic treatment on the toughness and tribological behaviors of eutectoid steel
(Korean Soc Mechanical Engineers, 2017)
Cryogenic treatment is a supplementary heat treatment usually applied after quenching. Its effects are permanent and this process affects the entire section. There have been many studies related to cryogenic treatment, ...
The stab resistance of fabrics impregnated with shear thickening fluids including various particle size of additives
(Elsevier Sci LTD, 2017)
Shear thickening fluid (STF) treated high performance fabrics have attracted much attention in the applications of body protection. In order to improve the contribution of STF treatments, we designed multiphase STFs and ...
Effect of heat treatment on the bending behavior of aluminum alloy tubes
(Korean Soc Mechanical Engineers, 2017)
Quasistatic experiments and numerical simulations were performed to investigate the three-point bending behavior of different temper AA6082 tubes in this study. The effect of heat treatment on the samples was investigated ...
The rheology of shear thickening fluids with various ceramic particle additives
(Elsevier Sci LTD, 2016)
In this paper, shear thickening fluids (STFs) and three different types of additive particles such as silicon carbide, aluminum oxide and boron carbide are presented. STFs were fabricated based on nanosize fumed silica ...
Effect of working fluid on the performance of the duplex Stirling refrigerator
(Elsevier Sci LTD, 2018)
Duplex Stirling refrigerator is one of the best alternative systems for providing green and clean energy solutions. It consists of Stirling refrigerator and Stirling heat engine in a back to back configuration. The main ...
Multi response optimization of turning operation with self-propelled rotary tool
(Elsevier Science BV, 2015)
The purpose of the study is to determine the cutting performance of self-propelled rotary tool (SPRT) in the turning operation of hardened EN24 steel by optimizing the cutting conditions. Parameters such as horizontal ...