Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorYurdakul, Arife
dc.contributor.authorDolekcekic, Emrah
dc.contributor.authorGünkaya, Göktuğ
dc.contributor.authorKavas, Taner
dc.contributor.authorKarasu, Bekir
dc.date.accessioned2019-10-22T16:58:54Z
dc.date.available2019-10-22T16:58:54Z
dc.date.issued2018
dc.identifier.issn0950-0618
dc.identifier.issn1879-0526
dc.identifier.urihttps://dx.doi.org/10.1016/j.conbuildmat.2018.03.062
dc.identifier.urihttps://hdl.handle.net/11421/21667
dc.descriptionWOS: 000431158200002en_US
dc.description.abstractIn this work, recently developed Zrnl glass fibres belonging to the SrO-Mn2O3-Fe2O3-MgO-ZrO2-SiO2 (SMFMZS) system have been used as reinforcing materials in cement. The highest (2.610 N/mm(2)) compressive strength value was obtained with the addition of 3 wt% of Zrn1 fibres into Portland cement. The microstructural behaviour of these fibres along with commercially available ones in the cement structure were investigated using a scanning electron microscope (SEM). Microstructures were fully compatible with mechanical results obtained. Eventually, it was determined that Zrn1 fibre can be a good candidate for cement reinforcement leading to high strength valuesen_US
dc.description.sponsorshipAnadolu University Scientific Research Projects Commission (BAP) [1003F107]en_US
dc.description.sponsorshipThe authors would like to express their sincere thanks to Anadolu University Scientific Research Projects Commission (BAP) for supporting this project under the 1003F107 contract number. The authors would also like to give their special gratitude to Associate Professor Dr. Hilmi Yurdakul for his invaluable efforts for microstructural investigation via electron microscopy.en_US
dc.language.isoengen_US
dc.publisherElsevier Sci LTDen_US
dc.relation.isversionof10.1016/j.conbuildmat.2018.03.062en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectGlass Fibreen_US
dc.subjectReinforcementen_US
dc.subjectCementen_US
dc.subjectCharacterizationen_US
dc.subjectMicrostructureen_US
dc.subjectMechanical Propertiesen_US
dc.titleThe usage of newly developed glass fibre in cement structure and their characterizationen_US
dc.typearticleen_US
dc.relation.journalConstruction and Building Materialsen_US
dc.contributor.departmentAnadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümüen_US
dc.identifier.volume170en_US
dc.identifier.startpage13en_US
dc.identifier.endpage19en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.contributor.institutionauthorGünkaya, Göktuğ
dc.contributor.institutionauthorKarasu, Bekir


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster