Kurum Yazarı "Kara, Alpagut" Seramik Mühendisliği İçin Listeleme
-
Characterisation of biscuit fired bone china body microstructure. Part 1: XRD and SEM of crystalline phases
Kara, Alpagut; Stevens, R (Elsevier Sci LTD, 2002)As a ceramic material bone china is a highly specialised product and is the basis of the world's most attractive and expensive types of tableware, mainly due to its translucency, whiteness, bright glaze, decoration quality, ... -
Characterisation of biscuit fired bone china body microstructure. Part II: Transmission electron microscopy (TEM) of glassy matrix
Kara, Alpagut; Stevens, R (Elsevier Sci LTD, 2002)In this second part oft lie study, electron transparent specimens of the biscuit fired bone china body were prepared for a conventional transmission electron microscopy (TEM) study. The crystalline phases present in the ... -
Interactions between an ABS type leadless glaze and a biscuit fired bone china body during glost firing. Part I: preparation of experimental phases
Kara, Alpagut; Stevens, R (Elsevier Sci LTD, 2002)In this paper, part of an extended study, crystalline phases of a biscuit fired bone china body, namely anorthite and beta-tricalcium phosphate (beta-TCP), were produced experimentally to be used in subsequent interface ... -
Interactions between an ABS type leadless glaze and a biscuit fired bone china body during glost firing. Part II: investigation of interactions
Kara, Alpagut; Stevens, R (Elsevier Sci LTD, 2002)This part of the study involves the investigation of the interactions between an ABS type commercial leadless glaze and a biscuit fired bone china body during glost firing at different temperatures using XRD and SEM ... -
Novel SiAlON ceramics for cutting tool applications
Mandal, Hasan; Kara, Ferhat; Turan, Servet; Kara, Alpagut (Trans Tech Publications LTD, 2003)New alpha-beta SiAlON ceramics were produced in aqueous medium by Using Multiple oxides as densifying additives. The sintered materials were characterised using a combinations of techniques such as XRD, SEM and TEM. The ... -
Performance of new ?-ß SiAlONs in turning operations
Mandal, Hasan; Kara, Ferhat; Turan, Servet; Kara, Alpagut (2001)New ?-ß SiAlON ceramics were produced, characterised and tested in turning operations of cast iron. Cutting speeds varied between 400-1200 m/min while feeding rates were between 0.3 to 0.5 mm/rev. The results were compared ... -
Performance of new alpha-beta SiAlONs in turning operations
Mandal, Hasan; Kara, Ferhat; Turan, Servet; Kara, Alpagut (Trans Tech Publications LTD, 2002)New alpha-beta SiAlON ceramics were produced, characterised and tested in turning operations of cast iron. Cutting speeds varied between 400-1200 m/min while feeding rates were between 0.3 to 0.5 mm/rev. The results were ...