| dc.contributor.author | Yaman, Bilge | |
| dc.contributor.author | Mandal, Hasan | |
| dc.date.accessioned | 2019-10-22T16:58:42Z | |
| dc.date.available | 2019-10-22T16:58:42Z | |
| dc.date.issued | 2009 | |
| dc.identifier.issn | 0167-577X | |
| dc.identifier.uri | https://dx.doi.org/10.1016/j.matlet.2009.01.086 | |
| dc.identifier.uri | https://hdl.handle.net/11421/21568 | |
| dc.description | WOS: 000265152700025 | en_US |
| dc.description.abstract | 25 vol.% cubic boron nitride (cBN) added tungsten carbide (WC) powders containing 6 wt.% Co (WC-6Co) were densified by spark plasma sintering (SPS) technique under different experimental conditions and the effect of cBN addition on the microstructure, mechanical properties and thermal conductivity were investigated. Over 99.5% theoretical density was achieved for WC-6Co-cBN composites sintered at 1300 degrees C. under 75 MPa pressure for 7.5 min. Under these conditions, cBN -> hBN phase transformation was not observed | en_US |
| dc.language.iso | eng | en_US |
| dc.publisher | Elsevier Science BV | en_US |
| dc.relation.isversionof | 10.1016/j.matlet.2009.01.086 | en_US |
| dc.rights | info:eu-repo/semantics/closedAccess | en_US |
| dc.subject | Tungsten Carbide | en_US |
| dc.subject | Wc-6Co-Cbn Composites | en_US |
| dc.subject | Spark Plasma Sintering | en_US |
| dc.title | Spark plasma sintering of Co-WC cubic boron nitride composites | en_US |
| dc.type | article | en_US |
| dc.relation.journal | Materials Letters | en_US |
| dc.contributor.department | Anadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümü | en_US |
| dc.identifier.volume | 63 | en_US |
| dc.identifier.issue | 12 | en_US |
| dc.identifier.startpage | 1041 | en_US |
| dc.identifier.endpage | 1043 | en_US |
| dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
| dc.contributor.institutionauthor | Mandal, Hasan | |
