| dc.contributor.author | Mallik, Awadesh Kumar | |
| dc.contributor.author | Reddy, K. Madhav | |
| dc.contributor.author | Açıkbaş, Nurcan Çalış | |
| dc.contributor.author | Kara, Ferhat | |
| dc.contributor.author | Mandal, Hasan | |
| dc.contributor.author | Basu, Debabrata | |
| dc.contributor.author | Basu, Bikramjit | |
| dc.date.accessioned | 2019-10-22T16:58:38Z | |
| dc.date.available | 2019-10-22T16:58:38Z | |
| dc.date.issued | 2011 | |
| dc.identifier.issn | 0272-8842 | |
| dc.identifier.issn | 1873-3956 | |
| dc.identifier.uri | https://dx.doi.org/10.1016/j.ceramint.2011.03.055 | |
| dc.identifier.uri | https://hdl.handle.net/11421/21531 | |
| dc.description | WOS: 000293759300061 | en_US |
| dc.description.abstract | The tribological properties of gas pressure sintered SiAlON and its composite with 18 wt% silicon carbide (SiC) against two different mating materials, i.e., alumina and SiAlON are evaluated. SiAlON and SiAlON-18%SiC composite ceramics were prepared by pressure less sintering and gas pressure sintering. Fretting wear tests were carried out under dry unlubricated ambient conditions (room temperature 23-25 degrees C; relative humidity 50-55%) with a load of 8 N for 45,000 cycles. Friction and wear properties of SiAlON-SiC proved better than the monolithic SiAlON. The formation of silica roll like structure on the composite worn surface was observed | en_US |
| dc.description.sponsorship | CSIR-TUBITAK | en_US |
| dc.description.sponsorship | This work was done in connection with Indo-Turkey S&T co-operation under CSIR-TUBITAK project titled "Development of SiAION Ceramics for Tribological Applications". | en_US |
| dc.language.iso | eng | en_US |
| dc.publisher | Elsevier Sci LTD | en_US |
| dc.relation.isversionof | 10.1016/j.ceramint.2011.03.055 | en_US |
| dc.rights | info:eu-repo/semantics/closedAccess | en_US |
| dc.subject | Sintering | en_US |
| dc.subject | Sialon And Sialon-Sic Composite | en_US |
| dc.subject | Hertzian Contact Pressures | en_US |
| dc.subject | Silica Roll | en_US |
| dc.subject | Tribology | en_US |
| dc.title | Influence of SiC addition on tribological properties of SiAlON | en_US |
| dc.type | article | en_US |
| dc.relation.journal | Ceramics International | en_US |
| dc.contributor.department | Anadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümü | en_US |
| dc.identifier.volume | 37 | en_US |
| dc.identifier.issue | 7 | en_US |
| dc.identifier.startpage | 2495 | en_US |
| dc.identifier.endpage | 2504 | en_US |
| dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |
| dc.contributor.institutionauthor | Kara, Ferhat | |
| dc.contributor.institutionauthor | Mandal, Hasan | |
