| dc.contributor.author | Ay, Nuran | |
| dc.contributor.author | Töre, I. | |
| dc.contributor.editor | Mandal, H | |
| dc.date.accessioned | 2019-10-21T21:12:40Z | |
| dc.date.available | 2019-10-21T21:12:40Z | |
| dc.date.issued | 2007 | |
| dc.identifier.isbn | 978-0-87849-439-2 | |
| dc.identifier.issn | 0255-5476 | |
| dc.identifier.uri | https://dx.doi.org/10.4028/www.scientific.net/MSF.554.207 | |
| dc.identifier.uri | https://hdl.handle.net/11421/21428 | |
| dc.description | 5th International Symposium on Nitrides -- APR 03-05, 2006 -- Anadolu Univ, Eskisehir, TURKEY | en_US |
| dc.description | WOS: 000248530400034 | en_US |
| dc.description.abstract | Pressureless sintering of hexagonal boron nitride (BN) with and without additives was performed using a powder which was previously nitrided at 900 degrees C and then heat treated at 1400 degrees C. Sintering additives were B2O3 (2, 4, 6 wt %) and Y2O3 (2, 4, 6 wt %) and sintering temperatures was 1900 degrees C. Sintered samples were characterized by XRD, SEM, micro hardness, density and mercury porosimeter measurements. Maximum density values of samples were 1.56 g/cm(3) without additives and 1.63 g/cm(3) with additives. Hardness values of samples were found to improve with the presence of additives. | en_US |
| dc.description.sponsorship | Turkish Ceram Soc, Sci & Technol Res Council Turkey | en_US |
| dc.language.iso | eng | en_US |
| dc.publisher | Trans Tech Publications LTD | en_US |
| dc.relation.ispartofseries | Materials Science Forum | |
| dc.relation.isversionof | 10.4028/www.scientific.net/MSF.554.207 | en_US |
| dc.rights | info:eu-repo/semantics/closedAccess | en_US |
| dc.subject | Hexagonal Boron Nitride | en_US |
| dc.subject | Pressureless Sintering | en_US |
| dc.subject | Additive | en_US |
| dc.subject | Characterization | en_US |
| dc.title | Pressureless sintering of hexagonal boron nitride powders | en_US |
| dc.type | conferenceObject | en_US |
| dc.relation.journal | Nitrides and Oxynitrides Iii | en_US |
| dc.contributor.department | Anadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümü | en_US |
| dc.identifier.volume | 554 | en_US |
| dc.identifier.startpage | 207 | en_US |
| dc.identifier.endpage | + | en_US |
| dc.relation.publicationcategory | Konferans Öğesi - Uluslararası - Kurum Öğretim Elemanı | en_US |
| dc.contributor.institutionauthor | Ay, Nuran | |
