Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorArslan, Gürsoy
dc.contributor.authorKalemtaş, Ayşe
dc.date.accessioned2019-10-21T21:12:39Z
dc.date.available2019-10-21T21:12:39Z
dc.date.issued2009
dc.identifier.issn0955-2219
dc.identifier.urihttps://dx.doi.org/10.1016/j.jeurceramsoc.2008.06.007
dc.identifier.urihttps://hdl.handle.net/11421/21424
dc.descriptionWOS: 000261839200018en_US
dc.description.abstractThe aim of this work was to shed light on the wetting mechanism in the SiC-B(4)C-Al system and to explore processing routes that enable infiltration of Al alloys into these ceramic powder mixtures without the formation of the deleterious reaction product Al(4)C(3). For this purpose, powder mixtures consisting of SiC and pre-treated B(4)C were pressureless infiltrated with At alloys at relatively low temperatures under an inert gas atmosphere. Depending on the characteristics of the starting powders fully infiltrated composites were achieved in the temperature range of 935-1420 degrees C. It was observed that addition of pre-treated B(4)C to SiC enabled complete infiltration of the similar to 0.6 cm thick preforms. The bulk density of all produced composites was > 98% of the X-ray density. By controlling the surface chemistry and particle size of the starting powders as well as the processing conditions, the wetting behaviour and reaction kinetics of this system could be tailored so as to render fully dense SiC-B(4)C-Al composites devoid of Al(4)C(3)en_US
dc.description.sponsorshipAnadolu University [030235]en_US
dc.description.sponsorshipWe are grateful to The Foundation for Scientific Research Projects of Anadolu University for funding the present study (Project No. 030235). We also would like to acknowledge Research Assistant Erhan Ayas and Prof. Dr. Servet Turan for having conducted part of the SEM work.en_US
dc.language.isoengen_US
dc.publisherElsevier Sci LTDen_US
dc.relation.isversionof10.1016/j.jeurceramsoc.2008.06.007en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCompositesen_US
dc.subjectCarbidesen_US
dc.subjectSicen_US
dc.subjectArmouren_US
dc.subjectInfiltrationen_US
dc.titleProcessing of silicon carbide-boron carbide-aluminium compositesen_US
dc.typearticleen_US
dc.relation.journalJournal of the European Ceramic Societyen_US
dc.contributor.departmentAnadolu Üniversitesi, Mühendislik Fakültesi, Malzeme Bilimi ve Mühendisliği Bölümüen_US
dc.identifier.volume29en_US
dc.identifier.issue3en_US
dc.identifier.startpage473en_US
dc.identifier.endpage480en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.contributor.institutionauthorArslan, Gürsoy


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster