dc.contributor.author | Ateş, Funda | |
dc.date.accessioned | 2019-10-21T21:12:16Z | |
dc.date.available | 2019-10-21T21:12:16Z | |
dc.date.issued | 2011 | |
dc.identifier.isbn | 9780791854686 | |
dc.identifier.uri | https://dx.doi.org/10.1115/ES2011-54689 | |
dc.identifier.uri | https://hdl.handle.net/11421/21327 | |
dc.description | ASME 2011 5th International Conference on Energy Sustainability, ES 2011 -- 7 August 2011 through 10 August 2011 -- Washington, DC -- 98350 | en_US |
dc.description.abstract | In this study, corncob was chosen as a biomass sample and the pyrolysis of this sample was carried out with or without catalyst at different conditions in a well-swept fixed-bed reactor. In the experimental studies, firstly the raw material was analysed for its moisture, ash, volatile matter and fixed carbon. Then, experiments were conducted with a heating rate of 700 °C/min, mean particle size and between 300-800 °C pyrolysis temperatures with or without catalyst. The catalytic experiments involved a dry mixing of the catalyst with the biomass using an in bed-mode in the nitrogen atmosphere. In the experimental studies, influence of catalyst and temperature on the corncob products was investigated. According to the experimental results; maximum bio-oil yield was obtained as 36.1% and 34.8% with or without catalyst at a pyrolysis temperature of 500°C, respectively. The use of catalyst showed its cracking effect at higher temperatures and the gas yield increased above pyrolysis temperature of 500 °C. Pyrolysis oils were examined by using elemental analysis and GC/MS. According to all results; the use of catalyst can be suggested in the pyrolysis to obtain both good quality fuels and valuable chemicals. Copyright © 2011 by ASME. | en_US |
dc.language.iso | eng | en_US |
dc.relation.isversionof | 10.1115/ES2011-54689 | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Biomass | en_US |
dc.subject | Catalyst | en_US |
dc.subject | Fast Pyrolysis | en_US |
dc.title | Fast pyrolysis of biomass with activated alumina | en_US |
dc.type | conferenceObject | en_US |
dc.relation.journal | ASME 2011 5th International Conference on Energy Sustainability, ES 2011 | en_US |
dc.contributor.department | Anadolu Üniversitesi, Mühendislik Fakültesi, Kimya Mühendisliği Bölümü | en_US |
dc.identifier.issue | PARTS A, B, AND C | en_US |
dc.identifier.startpage | 959 | en_US |
dc.identifier.endpage | 964 | en_US |
dc.relation.publicationcategory | Konferans Öğesi - Uluslararası - Kurum Öğretim Elemanı | en_US |
dc.contributor.institutionauthor | Ateş, Funda | |