Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorAteş, Funda
dc.contributor.authorPütün, Ayşe Eren
dc.contributor.authorPütün, Ersan
dc.date.accessioned2019-10-21T21:12:02Z
dc.date.available2019-10-21T21:12:02Z
dc.date.issued2005
dc.identifier.issn0196-8904
dc.identifier.issn1879-2227
dc.identifier.urihttps://dx.doi.org/10.1016/j.enconman.2004.03.011
dc.identifier.urihttps://hdl.handle.net/11421/21252
dc.descriptionWOS: 000225057800007en_US
dc.description.abstractSince Euphorbia rigida is a celluloid plant with low fat content, the oil yields of previous fixed bed pyrolysis studies were low. In order to increase the oil yield, biomass pyrolysis experiments were performed in a fixed bed reactor with two selected commercial catalysts, namely Criterion-534 and activated alumina, and natural zeolite (klinoptilolite). Experiments were conducted in a static atmosphere with a heating rate of 7 degreesCmin(-1), pyrolysis temperature of 550 degreesC and mean particle size of 0.55 mm. In the experiments, all the catalysts were used with various percentages, and the effects of the variable catalysts on the yields and chemical composition of the oils obtained were investigated. Oil yield reached 27.5% with the use of natural zeolite, 31% with Criterion-534 and 28.1% with activated alumina, while it was only 21.6% without a catalyst. The pyrolysis oils were examined by using spectroscopic and chromatographic analysis techniques, and the obtained results were compared with the results of similar experiments achieved without a catalysten_US
dc.language.isoengen_US
dc.publisherPergamon-Elsevier Science LTDen_US
dc.relation.isversionof10.1016/j.enconman.2004.03.011en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBiomassen_US
dc.subjectEuphorbia Rigidaen_US
dc.subjectCatalysten_US
dc.subjectPyrolysisen_US
dc.subjectOilen_US
dc.titleFixed bed pyrolysis of Euphorbia rigida with different catalystsen_US
dc.typearticleen_US
dc.relation.journalEnergy Conversion and Managementen_US
dc.contributor.departmentAnadolu Üniversitesi, Mühendislik Fakültesi, Kimya Mühendisliği Bölümüen_US
dc.identifier.volume46en_US
dc.identifier.issue3en_US
dc.identifier.startpage421en_US
dc.identifier.endpage432en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.contributor.institutionauthorAteş, Funda


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster