dc.contributor.author | Uzun, Başak Burcu | |
dc.contributor.author | Sarıoğlu, Nuri | |
dc.date.accessioned | 2019-10-21T21:11:59Z | |
dc.date.available | 2019-10-21T21:11:59Z | |
dc.date.issued | 2009 | |
dc.identifier.issn | 0378-3820 | |
dc.identifier.uri | https://dx.doi.org/10.1016/j.fuproc.2009.01.012 | |
dc.identifier.uri | https://hdl.handle.net/11421/21237 | |
dc.description | WOS: 000266155400012 | en_US |
dc.description.abstract | Non-catalytic and catalytic rapid pyrolysis of corn stalks was studied in a tubular fixed-bed reactor. The optimum operating conditions giving the highest liquid yield was determined as pyrolysis temperature of 500 degrees C, sweeping gas flow rate of 400 cm(3) min(-1) and heating rate of 500 degrees C min(-1). In the catalytic process, rapid pyrolysis of stalks was performed at the optimum conditions with catalysts such as ZSM-5, HY and USY. The highest liquid yield from the catalytic pyrolysis was 27.55% with ZSM-5, while the oil from non-catalytic pyrolysis was 33.30%. In the last part, various spectroscopic and chromatographic methods were applied for characterization of bio-oils. Although catalytic pyrolysis converts the long chains of alkanes and alkenes of the oils into lower weight hydrocarbons, the obtained oil yields were lower than those of non-catalytic pyrolysis. USY catalyst gives the highest amount of aromatics among the catalysts used. Moreover, TG-DTA analyses were applied on raw materials to investigate thermal degradation of corn stalks and calculate the kinetic parameters | en_US |
dc.language.iso | eng | en_US |
dc.publisher | Elsevier Science BV | en_US |
dc.relation.isversionof | 10.1016/j.fuproc.2009.01.012 | en_US |
dc.rights | info:eu-repo/semantics/closedAccess | en_US |
dc.subject | Corn Stalks | en_US |
dc.subject | Rapid Pyrolysis | en_US |
dc.subject | Catalytic Pyrolysis | en_US |
dc.subject | Bio-Fuel | en_US |
dc.subject | Tg/Dta | en_US |
dc.title | Rapid and catalytic pyrolysis of corn stalks | en_US |
dc.type | article | en_US |
dc.relation.journal | Fuel Processing Technology | en_US |
dc.contributor.department | Anadolu Üniversitesi, Mühendislik Fakültesi, Kimya Mühendisliği Bölümü | en_US |
dc.identifier.volume | 90 | en_US |
dc.identifier.issue | 5 | en_US |
dc.identifier.startpage | 705 | en_US |
dc.identifier.endpage | 716 | en_US |
dc.relation.publicationcategory | Makale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı | en_US |