Influence of temperature and alumina catalyst on pyrolysis of corncob

Abstract

Corncob has been investigated as an alternative feedstock to obtain fuels and chemicals via pyrolysis in fixed-bed reactor. The influence of pyrolysis temperature in the range 300-800 degrees C as well as the catalyst effects on the products was investigated in detail and the obtained results were compared. The results indicated that a maximum oil yield of 22.2% was obtained at a moderate temperature of 600 degrees C. The oil yield was reduced when the temperature was increased from 600 to 800 degrees C, whereas the gas yield increased. Pyrolysis oils were examined by using instrumental analysis, H-1 NMR spectroscopy and GC/MS. This analysis revealed that the pyrolysis oils were chemically very heterogeneous at all temperatures. It was determined that the most abundant compounds composing the bio-oil were phenolics. It was observed that the catalyst decreased the reaction temperature. Most of the components obtained using a catalyst at moderate temperatures was close to those obtained at high temperatures without using a catalyst. Moreover, the use of a catalyst and the high temperatures of the reactions also decreased the amount of oxygenated compounds produced. According to these results, corncob bio-oils can be used as fuel and constitute a valuable source of chemical raw materials