Kurum Yazarı "Ayas, Erhan" Bildiri Koleksiyonu İçin Listeleme
-
alpha/beta SiAlON BASED COMPOSITES INCORPORATED WITH MoSi2 FOR ELECTRICAL APPLICATIONS
Ayas, Erhan; Kara, Alpagut; Kara, Ferhat (Amer Ceramic Soc, 2010)Electrically conductive alpha-beta SiAlON composites containing 30 vol. % MoSi2 was prepared by gas pressure sintering (GPS). The effect of sintering atmosphere on phase formation, grain growth, mechanical and electrical ... -
A Novel Approach For Preparing Electrically Conductive SiAlON-TiN Composites by Spark Plasma Sintering
Ayas, Erhan; Kara, Alpagut; Kara, Ferhat (Trans Tech Publications LTD, 2009)An effective approach for preparing electrically conductive SiAlON-TiN composites was developed. Granules of a designed composition of alpha-beta SiAlON was obtained by spray drying and coated with varying amounts of TiO(2) ... -
Optimization of the optical properties of alpha-SiAlON through a decrease in starting powder size
Kurama, Semra; Avcıoğlu, Suna; Ayas, Erhan (Elsevier Sci LTD, 2015)In the present work, the effects of initial powder size on the sintering behavior and optical properties of Dy-alpha-SiAlON ceramics produced by the SPS technique are investigated. The powders were prepared using high ... -
Pressureless sintering of Al2O3-TiCN composites
Ayas, Erhan; Kara, Alpagut (Trans Tech Publications LTD, 2004)A composition of 70 wt % Al2O3 + 30 wt % TiCN was prepared and pressureless-sintered at temperatures ranging from 1700 to 1840degreesC. In order to achieve densification, a powder bed was also employed. The resultant ... -
Production of alpha-beta SiAlON-TiN/TiCN composites by gas pressure sintering
Ayas, Erhan; Kara, Alpagut; Mandal, Hasan; Turan, Servet; Kara, Ferhat (Belgian Ceramic Society, 2004)Due to the favorable properties possessed by novel alpha-beta SiAlONs, they are attractive materials for cutting tool applications. Such applications require materials with high hardness, high fracture toughness and high ... -
Spark plasma sintering of Si3N4-B4C composites
Ayas, Erhan; Kalemtaş, Ayşe.; Arslan, Gökhan; Kara, Alpagut; Kara, Ferhat (Ceramic Soc Japan-Nippon Seramikkusu Kyokai, 2008)In this study the production Of Si3N4-B4C Composites using spark plasma sintering technique was studied. This technique was preferred in order to minimize the reactions between starting constituents. Fully dense Si3N4 ... -
Spark Plasma Sintering of Silicon Nitride-Boron Carbide Composites
Ayas, Erhan; Kalemtaş, Ayşe.; Arslan, Gökhan; Kara, Alpagut; Kara, Ferhat (Trans Tech Publications LTD, 2009)Si(3)N(4)-B(4)C composites containing fine and coarse B(4)C particles were produced using Al(2)O(3) and Y(2)O(3) as sintering additives via spark plasma sintering (SPS) technique. Phase assemblages of the produced composites ... -
?/ß SiAlON based composites incorporated with MoSi2 for electrical applications
Ayas, Erhan; Kara, Alpagut; Kara, Ferhat (2010)Electrically conductive ?-ß SiAlON composites containing 30 vol. % MoSi2 was prepared by gas pressure sintering (GPS). The effect of sintering atmosphere on phase formation, grain growth, mechanical and electrical properties ...