Yazar "Arslan, Gökhan" için Bildiri Koleksiyonu listeleme
-
Effect of Processing Parameters on Compressive Behavior of Ti Foams
Tuncer, N.; Arslan, Gökhan (Destech Publications, Inc, 2008)Among metal foams, titanium (Ti) and its alloys are very attractive since they combine unique properties such as high strength-to-weight ratio, excellent corrosion resistance and biocompatibility. This study presents a ... -
Investigation of PM parameters' effect on architecture of titanium foams using X-ray microtomography
Tuncer, N.; Maire, E.; Salvo, L.; Arslan, Gökhan (European Powder Metallurgy Association (EPMA), 2010)Titanium foams have been of interest in dental and orthopedic implants over the past few decades on account of their excellent mechanical properties, chemical stability, and biocompatibility. In this study, titanium foams ... -
Pressureless Melt Infiltrated Non-Oxide Ceramic-Metal Composites
Kalemtaş, Ayşe; Arslan, Gökhan; Kara, Ferhat (Trans Tech Publications LTD, 2009)In the present study highly dense (open porosity < 1 %), light-weight (d <= 2.85 g/cm(3)) and Al(4)C(3)-free non-oxide ceramic-metal composites were produced at comparatively low temperatures (<= 1250 degrees C) by pressurless ... -
Production of titanium foams for implant applications
Tuncer, N.; Arslan, Gökhan (Mary Ann Liebert Inc, 2007)… -
Reaction model for the boron carbide/aluminium system
Arslan, Gökhan; Kara, Ferhat; Turan, Servet (Trans Tech Publications LTD, 2004)An attempt has been made to shed light on the reaction mechanism during the production of B4C/Al composites by making use of the measured phase contents of the phases B4C, Al, Al3BC and AlB2. It was found that the agreement ... -
Spark plasma sintering of Si3N4-B4C composites
Ayas, Erhan; Kalemtaş, Ayşe.; Arslan, Gökhan; Kara, Alpagut; Kara, Ferhat (Ceramic Soc Japan-Nippon Seramikkusu Kyokai, 2008)In this study the production Of Si3N4-B4C Composites using spark plasma sintering technique was studied. This technique was preferred in order to minimize the reactions between starting constituents. Fully dense Si3N4 ... -
Spark Plasma Sintering of Silicon Nitride-Boron Carbide Composites
Ayas, Erhan; Kalemtaş, Ayşe.; Arslan, Gökhan; Kara, Alpagut; Kara, Ferhat (Trans Tech Publications LTD, 2009)Si(3)N(4)-B(4)C composites containing fine and coarse B(4)C particles were produced using Al(2)O(3) and Y(2)O(3) as sintering additives via spark plasma sintering (SPS) technique. Phase assemblages of the produced composites ...