Başlık için Malzeme Bilimi ve Mühendisliği Bölümü listeleme
Toplam kayıt 444, listelenen: 420-439
-
Utilisation of a natural stone with fluxing ability in floor tile body as a Na-feldspar replacement
(Trans Tech Publications LTD, 2004)In 1960's the floor tile production of Turkey was started with a large use of K-feldspar as a fluxing agent. However, due to its limited deposits companies begun to employ Na-feldspar instead. At present, considerable level ... -
Utilisation of concentrator wastes of etibor Kirka Borax Company in the recipe of an opaque frit used for wall tile glazes as an acid boric replacement
(Trans Tech Publications LTD, 2004)Turkey holds similar to63% of total boron deposition shares of the world with 803 million tons. Eti Holding, being the most important producer, possesses 31% of total world production on the B2O3 basis. Like every other ... -
Utilization of a phosphate ester as a dispersant for SiAlON based ceramics
(Trans Tech Publications LTD, 2007)Aqueous dispersions of SiAION forming powders (Si3N4, AIN and Y2O3) were obtained. Dispersibility of powders was found to be improved by addition of sodium tripolyphosphate. Stable aqueous suspensions of SiAION forming ... -
Utilization of a sandy clay in double-fired wall tile bodies
(Techna Srl, 2010)In the production of ceramic tiles, composition of body and firing conditions determine the phase transformations and in turn affect the final properties of the product Thus, selection of relevant raw materials and ... -
Utilization of borax solid wastes in fast single-firing porcelain tile glass-ceramic glazes under industrial working conditions
(2008)In this investigation, the wastes of Eti Maden Kirka Boron Company of Turkiye were evaluated in the production of diopside and anorthite-based glass-ceramic glazes suitable for porcelain tiles fast and single-fired under ... -
Utilization of coal combustion fly ash in terracotta bodies
(Trans Tech Publications LTD, 2004)In this present work, coal combustion fly ash from a power plant in Turkey was used in combination with a traditional raw material in terracotta production with the aim of having a product with improved physico-mechanical ... -
Utilization of Magnesite Host Rocks in Wall Tile
(Australian Ceramic Society, 2015)The aim of this work is to search the usage of magnesite host rocks from the magnesite deposits of Eskisehir (Turkey) as a raw material in wall tile body. Two different magnesite host rock samples were characterized and ... -
Utilization of refractory brick wastes in concrete production as aggregates
(Minerals, Metals & Materials Soc, 2006)The refractory bricks of a rotary cement furnace containing of alumina and magnesium chromite were studied in order to determine whether they could be used in the concrete production as aggregates. Three mortars were ... -
The utilization of waste clay from coal basin in the wall tile body formulation
(Trans Tech Publications LTD, 2004)In this study, the waste clays extracted from coal basin were used as a wall tile ingredient instead of the clay materials of the standardized biscuit formulation of the wall tile. XRD data show that waste clay contains ... -
Utilizing of borax solid wast es in roof tile and brick bodies
(Minerals, Metals & Materials Soc, 2006)Boron minerals are widely employed in various fields such as ceramic, glass, cement, metallurgy, etc. Although boron deposits of the world are limited, the production level of boron-based products is continuously increased. ... -
Utilizing of Borax solid wastes in roof tile and brick bodies
(2006)Boron minerals are widely employed in various fields such as ceramic, glass, cement, metallurgy, etc. Although boron deposits of the world are limited, the production level of boron-based products is continuously increased. ... -
Utilizzo della trachite come fondente nella produzione di piastrelle ceramiche
(2006)The possible use of trachyte as an alternative fluxing agent in a commercial floor tile body was investigated. The experiments were carried out in two parts: In the first part, standard tests were applied to the products ... -
The Valance Determination of Cerium Ions in alpha-SiAlON by Electron Energy Loss Spectroscopy Analysis
(Cambridge University Press, 2008)… -
Vibration aided vacuum infusion of bnns modified carbon Fabric/Epoxy composites
(International Committee on Composite Materials, 2017)Two-dimensional (2D) materials have aroused remarkable attention since the successful separation of graphene, atomic layers of carbon, has demonstrated novel electronic properties. Boron nitride (BN) is a structural analog ... -
Vibrational and mechanical properties of single layer MXene structures: a first-principles investigation
(IOP Publishing LTD, 2016)MXenes, carbides, nitrides and carbonitrides of early transition metals are the new members of two dimensional materials family given with a formula of Mn+1 X-n. Recent advances in chemical exfoliation and CVD growth of ... -
Wear behavior of solid SiAlON milling tools during high speed milling of Inconel 718
(Elsevier Science Sa, 2017)Machining of Inconel 718 is a challenging process because of high hot strength and hardness, high reactivity with the tool materials and low thermal conductivity of Inconel 718 alloy. Although SiAION ceramics in the form ... -
Wear behaviour of alpha- and alpha/beta-SiAlON ceramics stabilized with Nd2O3 and Y2O3
(Elsevier Sci LTD, 2009)alpha- and alpha/beta-SiAlON compositions, doped with Y2O3 or Nd2O3, were densified by gas pressure sintering (GPS). The wear and mechanical properties of the materials were investigated and compared to beta-Si3N4 materials. ... -
Wear Characteristics of Traditional Manganese Phosphate and Composite hBN Coatings
(Taylor & Francis Inc, 2013)In this study, the tribological properties of traditional manganese phosphate coatings and composite hBN coatings composed of nano-hexagonal boron nitride (hBN) in layered manganese phosphate crystals on AISI 1040 steel ... -
Wear on SiAlON ceramic tools in drilling of aerospace grade CFRP composites
(Elsevier Science Sa, 2015)Carbon fiber reinforced polymer (CFRP) composites are difficult to cut materials due to their anisotropic structure and extremely abrasive nature of the carbon fibers. The tool materials used for drilling of CFRP composites ... -
Wear properties of alpha- and alpha/beta-SiAlON ceramics obtained by gas pressure sintering and spark plasma sintering
(Elsevier Sci LTD, 2011)In this study, alpha- and alpha/beta-SiAlON materials, doped with Y(2)O(3) and Nd(2)O(3), were sintered using two different sintering processes: spark plasma sintering (SPS) and gas pressure sintering (GPS). The wear and ...