Güncel Gönderiler: Porsuk Meslek Yüksekokulu
Toplam kayıt 112, listelenen: 101-112
-
Recycling of coal combustion wastes
(SAGE Publications LTD, 2009)The separation of unburned carbon from coal-fired power plant bottom ashes was conducted in order to increase the possibility of the recycling of coal combustion wastes. A two-stage flotation technique was used for this ... -
Conversion of coal-fired bottom ash to fuel and construction materials
(Taylor & Francis LTD, 2017)In this study, solid wastes taken from Seyitomer coal-fired power plant bottom ashes were subjected to experimental research to obtain a carbon-rich fraction. The possible recycling opportunities of remaining inorganic ... -
Floatability of Eskisehir Koyunagili Region Lignite Fines
(Int Scientific Conference Sgem, 2010)In this work, samples were taken from Koyunagili Lignites Company Washing Plant feed and were subjected to extensive research to determine the floatability of lignite fines. The optimum conditions of flotation were determined ... -
The Utilization of Unsaleable Lignite Fines at Eskisehir Koyunagili Region Lignite Deposits
(Taylor & Francis Inc, 2012)Samples taken from stock piles of Koyunagili Lignites Company preparation plant were cleaned by means of gravity methods to obtain a saleable product. The optimum conditions of separation were determined under the laboratory ... -
The effect of ground granulated blast-furnace slag on properties of Horasan mortar
(Elsevier Sci LTD, 2013)Mortars containing brick or tile powder and lime are called Horasan mortar in Ottoman and Cocciopesto in ancient Roman. In this study, ground granulate blast-furnace slag was used in Horasan mortars to obtain improvements ... -
Improvement of Khorasan mortar with fly ash for restoration of historical buildings
(Walter De Gruyter GMBH, 2014)In this study, the effects of fly ash on Khorasan mortar composed of brick or tile powder and lime were investigated to improve its mechanical properties. In the mixtures, fly ash was used instead of 0- to 4-mm crushed ... -
The effect of cover thickness on rebars exposed to elevated temperatures
(Elsevier Sci LTD, 2008)In this study, the mechanical properties of structural rebars have been investigated after exposure of elevated temperatures. The mortar was prepared with CEM I 42.5N cement and fired clay. The S 420a, circle divide 16 mm ... -
Effect of expanded perlite aggregate on the properties of lightweight concrete
(Elsevier Science Sa, 2008)Expanded perlite aggregate (EPA) is a heat and sound insulator, and lightweight material which ensures economical benefits in constructions. This paper investigates the properties of concrete containing EPA considering ... -
Yarn hairiness and the effect of surface characteristics of the ring traveller
(SAGE Publications LTD, 2016)Increasing the wear resistance of the traveller remains an immense challenge due to the high mechanical and thermal stress experienced by travellers during the spinning operation. Due to this exposure, surface deformation, ... -
On the Feasibility of Using Photovoltaic Panels to Produce the Electricity Required at a Chemical Treatment Plant on Industrial Company
(Springer International Publishing Ag, 2018)This work consists of a study focusing on the feasibility of using photovoltaic panels to produce the electricity required by plant operations at a chemical treatment plant belonging to an industrial company. Using available ... -
A unifying approach to track-to-track correlation for multisensor fusion for multiple targets
(Natl Inst Optoelectronics, 2015)In this paper, a global modeling approach was proposed for multi sensor fusion problems. Once the global model was investigated considering the data association and fusion, it is adapted to track to track correlation problem ... -
Temmoku sırları
(Anadolu Üniversitesi, 2012)Temmoku sırlar keşfedildiğinden bu yana, en önemli sırlardan biri olmuştur. Temmoku sırların üretimi, Çin’de Sung (960–1279) hanedanlığı döneminde siyah ve kahverengi sırların üretimi ile başladı. Sung Hanedanlığı döneminde ...
