Ara
Toplam kayıt 179, listelenen: 131-140
The effect of cover thickness on rebars exposed to elevated temperatures
(Elsevier Sci LTD, 2008)
In this study, the mechanical properties of structural rebars have been investigated after exposure of elevated temperatures. The mortar was prepared with CEM I 42.5N cement and fired clay. The S 420a, circle divide 16 mm ...
A laboratory investigation for shear modulus of silty sand soils
(Avestia Publishing, 2017)
Dynamic shear modulus gives information about dynamic soil response and deformability characteristics. Dynamic shear modulus of the soils can be determined by using field tests or laboratory experiments such as resonant ...
Aşçıların Mesleki Özerklikleri İle Yaratıcılık Süreci İlişkisi
(2015)
ÖZ Bu çalışma, aşçıların yaratıcılık süreci aşamalarına, mesleki özerkliğin etkisinin belirlenmesi amacıyla yapılmıştır. Bu amaca yönelik olarak, alanyazın incelenerek bir soru formu oluşturulmuştur. Aşçılık mesleki dayanışma ...
Anadolu Üniversiteleri Öğrencilerinin Internet Üzerinden Bilgi Arama Davranışları
(2007)
Bu çalışmanın amacı, öğrencilerin Internet üzerinden bilgi arama davranışlarını incelemektir. Araştırmada kullanılan anket Anadolu Üniversitesi’nde öğrenim gören 472 öğrenci üzerinde uygulanmıştır. Araştırma sonuçları; ...
Türkiye'de beklenen enflasyon ile enflasyon beklentilerini etkileyen makro ekonomik değişkenler arasındaki nedensellik ilişkisinin testi
(2011)
Ekonomik birimler enflasyon beklentilerini oluştururken, gerçekleşen geçmiş dönem enflasyon oranı, hedeflenen enflasyon oranı, ekonomik faaliyet, döviz kuru ve petrol fiyatlarındaki değişimler ve ülkenin risk primi gibi ...
Yarn hairiness and the effect of surface characteristics of the ring traveller
(SAGE Publications LTD, 2016)
Increasing the wear resistance of the traveller remains an immense challenge due to the high mechanical and thermal stress experienced by travellers during the spinning operation. Due to this exposure, surface deformation, ...
Construction professionals' perspectives on cross-cultural training for international construction projects
(2010)
Cross-cultural training has long been recognized as an effective method to facilitate cross-cultural interaction. Many global organizations provide cross-cultural training to their expatriates to increase productivity in ...
Atık Lastik Agregalı Harçların Mekanik ve Fiziksel Özelliklerinin İncelenmesi
(2014)
Atık taşıt lastikleri günümüzde önemli sorunlardan birisidir. Bu çalışmada, atık otomobil lastikleri agrega yerine kullanılarak harçlar üretilmiş ve harçların özellikleri araştırılmıştır. Bu amaçla atık lastikli harçlarda ...
New strategies for improvement of structural gas turbine engine parts
(2013)
In this study, the basic limitations of superalloys' in high temperature performances will be explained and then after giving the important properties of MoSi2 such as oxidation behaviour at relatively low temperatures ...
An Overview of the Signs and Graphical Representations Used in Smart Buildings and Cities
(Springer International Publishing Ag, 2018)
Smart Cities are the names given to technological and environment friendly projects designed to get rid of factors such as bad urbanization, noise, environmental pollution that harm people and nature. Intelligent management ...