Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorÖzcan, Ali
dc.contributor.authorŞahin, Yücel
dc.contributor.authorKoparal, Ali Savaş
dc.contributor.authorOturan, Mehmet A.
dc.date.accessioned2019-10-20T09:13:40Z
dc.date.available2019-10-20T09:13:40Z
dc.date.issued2008
dc.identifier.issn0304-3894
dc.identifier.issn1873-3336
dc.identifier.urihttps://dx.doi.org/10.1016/j.jhazmat.2007.09.015
dc.identifier.urihttps://hdl.handle.net/11421/17010
dc.descriptionWOS: 000255417500088en_US
dc.descriptionPubMed ID: 17935883en_US
dc.description.abstractThe degradation of the picloram, a widely used herbicide, has been under-taken by the electrochemical advanced oxidation process, namely electro-Fenton in aqueous solution. This process generates catalytically hydroxyl radicals that are strong oxidizing reagents for the oxidation of organic substances. Degradation kinetics of picloram was investigated. Kinetic results evidence a pseudo first-order degradation, with a rate constant of reaction between picloram and hydroxyl radicals of (2.73 +/- 0.08) x 109 M-1 s(-1). The effect of applied current and catalyst concentration on the degradation and mineralization of picloram was also investigated. The optimum applied current and catalyst concentration values for the degradation of picloram was determined as 300 mA and 0.2 mM Fe3+, respectively. Mineralization of picloram was followed by the total organic carbon (TOC) analysis. At the end of 8 h of electrolysis, 95% of the initial TOC was removed. Several degradation products were identified by using HPLC, LC-MS, GC-MS, and IC analysis. The identified by-products allowed to propose a mineralization pathway for the picloram. degradationen_US
dc.language.isoengen_US
dc.publisherElsevier Science BVen_US
dc.relation.isversionof10.1016/j.jhazmat.2007.09.015en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectPicloramen_US
dc.subjectAopen_US
dc.subjectElectro-Fentonen_US
dc.subjectHydroxyl Radicalen_US
dc.subjectDegradationen_US
dc.titleDegradation of picloram by the electro-Fenton processen_US
dc.typearticleen_US
dc.relation.journalJournal of Hazardous Materialsen_US
dc.contributor.departmentAnadolu Üniversitesi, Fen Fakültesi, Fizik Bölümüen_US
dc.identifier.volume153en_US
dc.identifier.issue1.Şuben_US
dc.identifier.startpage718en_US
dc.identifier.endpage727en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.contributor.institutionauthorÖzcan, Ali
dc.contributor.institutionauthorŞahin, Yücel
dc.contributor.institutionauthorKoparal, Ali Savaş


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster