Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorMandal, Hasan
dc.contributor.authorKara, Ferhat
dc.contributor.authorTuran, Servet
dc.contributor.authorKara, Alpagut
dc.date.accessioned2019-10-20T07:59:52Z
dc.date.available2019-10-20T07:59:52Z
dc.date.issued2001
dc.identifier.issn1013-9826
dc.identifier.urihttps://hdl.handle.net/11421/15800
dc.description7th Conference and Exhibition of the European Ceramic Society -- 9 September 2001 through 13 September 2001 -- Brugge -- 58742en_US
dc.description.abstractNew ?-ß SiAlON ceramics were produced, characterised and tested in turning operations of cast iron. Cutting speeds varied between 400-1200 m/min while feeding rates were between 0.3 to 0.5 mm/rev. The results were compared with some of commercially available ceramic inserts. It was proved that new ?-ß SiAlONs offer reduced tool wear and hence increased tool life for cast iron machining.en_US
dc.language.isoengen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCutting Toolen_US
dc.subjectSialonen_US
dc.subjectTurning Operationsen_US
dc.titlePerformance of new ?-ß SiAlONs in turning operationsen_US
dc.typeconferenceObjecten_US
dc.relation.journalKey Engineering Materialsen_US
dc.contributor.departmentAnadolu Üniversitesi, Fen Bilimleri Enstitüsü, Seramik Mühendisliği Anabilim Dalıen_US
dc.identifier.volume206-213en_US
dc.identifier.issueIIen_US
dc.identifier.startpage929en_US
dc.identifier.endpage932en_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.contributor.institutionauthorMandal, Hasan
dc.contributor.institutionauthorKara, Ferhat
dc.contributor.institutionauthorTuran, Servet
dc.contributor.institutionauthorKara, Alpagut


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster