| dc.contributor.author | Kurama, Semra | |
| dc.contributor.author | Herrmann, M | |
| dc.contributor.author | Mandal, Hasan | |
| dc.date.accessioned | 2019-10-19T21:04:07Z | |
| dc.date.available | 2019-10-19T21:04:07Z | |
| dc.date.issued | 2002 | |
| dc.identifier.isbn | 0-87849-882-6 | |
| dc.identifier.issn | 1013-9826 | |
| dc.identifier.uri | https://dx.doi.org/10.4028/www.scientific.net/KEM.206-213.1009 | |
| dc.identifier.uri | https://hdl.handle.net/11421/15745 | |
| dc.description | 7th Conference of the European-Ceramic-Society -- SEP 09-13, 2001 -- BRUGGE, BELGIUM | en_US |
| dc.description | WOS: 000172651400246 | en_US |
| dc.description.abstract | Two types of Y-alpha -SiAlON composition, with different amounts of additional liquid phase were densified in a gas pressure sintering furnace using three different sintering cycles. One series of samples was heated up to 1825 degreesC for 3 hrs, another group of samples was held at a lower temperature (1500 degreesC or 1600 degreesC) for I hr and then heated up to 1825 degreesC for 3 hrs. The effect of the amounts of sintering additive and processing conditions on density and microstructure were evaluated. | en_US |
| dc.description.sponsorship | European Ceram Soc, Belgian Ceram Soc | en_US |
| dc.language.iso | eng | en_US |
| dc.publisher | Trans Tech Publications LTD | en_US |
| dc.relation.ispartofseries | KEY ENGINEERING MATERIALS | |
| dc.relation.isversionof | 10.4028/www.scientific.net/KEM.206-213.1009 | en_US |
| dc.rights | info:eu-repo/semantics/closedAccess | en_US |
| dc.subject | Alpha-Sialon | en_US |
| dc.subject | Grain Morphology | en_US |
| dc.subject | Process Conditions | en_US |
| dc.subject | Additive Content | en_US |
| dc.title | Improvement of elongated alpha-SiAlON ceramics by variation of the processing conditions and amounts of additives | en_US |
| dc.type | conferenceObject | en_US |
| dc.relation.journal | Euro Ceramics Vii, Pt 1-3 | en_US |
| dc.contributor.department | Anadolu Üniversitesi, Fen Bilimleri Enstitüsü, Seramik Mühendisliği Anabilim Dalı | en_US |
| dc.identifier.volume | 206-2 | en_US |
| dc.identifier.startpage | 1009 | en_US |
| dc.identifier.endpage | 1012 | en_US |
| dc.relation.publicationcategory | Konferans Öğesi - Uluslararası - Kurum Öğretim Elemanı | en_US] |
| dc.contributor.institutionauthor | Kurama, Semra | |
| dc.contributor.institutionauthor | Mandal, Hasan | |
