Başlık için Makale Koleksiyonu listeleme
Toplam kayıt 71, listelenen: 35-54
-
Hard and tough ?-SiAION ceramics
(2000)Yb, Nd/Ca and Ce/Ca containing a-sialon starting compositions have been densified by either pressureless sintering or capsul free sinter/HIP'ing using "conventional" ?-Si3N4 powder. X-ray diffraction studies of both ... -
High resolution transmission electron microscopy of grain boundaries between hexagonal boron nitride grains in Si3N4-SiC particulate composites
(Wiley-V C H Verlag GMBH, 2000)High resolution transmission electron microscope observations of grain boundaries in hexagonal boron nitride in which adjacent grains are rotated with respect to one another about either <2 (1) over bar (1) over bar 0> or ... -
Hydrated aluminium sulfate precipitation by enzyme-catalysed urea decomposition
(Elsevier Sci LTD, 2000)Hydrated basic aluminium hydroxide precipitates were obtained from aluminium sulphate solution at room temperature and at 92 degrees C by using urea. Enzyme urease was used to decompose urea at room temperature. It was ... -
Improvement of sintering and microstructural homogeneity of a diphasic mullite
(Elsevier Sci LTD, 2001)Effect of seeding of boehmite-colloidal silica mixture with aluminium sulphate-colloidal silica mixture on its mullite formation and sintering behaviours and microstructural development was studied. It was observed that ... -
Influence of sample thickness on the performance of photostrictive ceramics
(Amer Inst Physics, 1998)Ferroelectric materials with high photovoltaic properties are of interest for new optical devices such as photostrictive ceramic actuators. However, fabrication of these devices requires development of materials exhibiting ... -
The influence of silicoferrochromium fume on concrete properties
(1995)Silicoferrochromium fume containing 85.5% SiO 2 was investigated to determine whether it could be used as an admixture in concrete to increase its strength. The fume was added at the dosage rates of 0-5 % by weight of ... -
The influence of zircon on the mechanical properties and thermal shock behaviour of slip-cast alumina-mullite refractories
(Elsevier Science BV, 2002)Mechanical properties of slip-cast alumina-mullite (AM) refractories were improved significantly by the addition of similar to 2-mu-m zircon (ZrSiO4) particles. Fracture behaviour showed mainly transgranular, with some ... -
Interactions between an ABS type leadless glaze and a biscuit fired bone china body during glost firing. Part I: preparation of experimental phases
(Elsevier Sci LTD, 2002)In this paper, part of an extended study, crystalline phases of a biscuit fired bone china body, namely anorthite and beta-tricalcium phosphate (beta-TCP), were produced experimentally to be used in subsequent interface ... -
Interactions between an ABS type leadless glaze and a biscuit fired bone china body during glost firing. Part II: investigation of interactions
(Elsevier Sci LTD, 2002)This part of the study involves the investigation of the interactions between an ABS type commercial leadless glaze and a biscuit fired bone china body during glost firing at different temperatures using XRD and SEM ... -
Interphase boundaries between hexagonal boron nitride and beta silicon nitride in silicon nitride-silicon carbide particulate composites
(1997)Inter phase boundaries between hexagonal boron nitride and Q-Si3N4 in hot isostatically pressed Si3N4-SiC particulate composites, in which boron nitride appears as a trace contaminant, have been examined using high resolution ... -
Investigation of the phase composition and stability of the alpha-SiAlONs by the Rietveld method
(Elsevier Sci LTD, 2002)Different compositions of Y- and Nd-alpha-SiAlONs were sintered at 1825 degreesC and analysed by the XRD method. The Rietveld technique was used for characterisation of the diffraction pattern and the x value of alpha-SiAlON, ... -
Luminescence properties of terbium-, cerium-, or europium-doped alpha-sialon materials
(Academic Press Inc Elsevier Science, 2002)… -
Melting behaviour of glasses in the SrO-MgO-ZrO2-SiO2 system
(Soc Glass Technology, 1999)In the SrO-MgO-ZrO2-SiO2 system a large range of compositions with 60, 55, 50, 45, 40 and 35 wt% silica has been thoroughly investigated The effect of silica and other constituents on melting, annealing and colour variations ... -
Microstructural characterization of reactively sintered mullites
(Amer Ceramic Soc, 2000)Mullite ceramics have been produced by reaction sintering of powders prepared using pseudoboehmite-colloidal silica and aluminum sulfate-colloidal silica mixtures. The microstructural development of these mullites was ... -
Microstructural characterization of surface layers formed on a low alloy steel during erosion - oxidation in a fluidized bed
(Chapman Hall LTD, 1997)Low alloy steel specimens were subjected to erosion-oxidation in a simulated fluidized bed environ ment in the range 100-600 degrees C. Transmission electron microscopy was carried out on the surfaces which experienced ... -
Nanocomposite PLZT ceramic materials in comparison with other processing technique for photostrictive application
(Ceramic Soc Japan-Nippon Seramikkusu Kyokai, 2001)The performance of photostrictive materials can be enhanced by controlling the materials and microstructural characteristics through processing methods, ceramic composition and dopant type/content. In this paper the influence ... -
New developments in ? -SiAlON ceramics
(1999)Two different ?-sialon compositions have been densified by either pressureless sintering or capsul-free sinter HIPing using either single cation namely strontium, lanthanum, cerium, neodymium or their equimolar mixtures ... -
New heat treatment methods for glass removal from silicon nitride and sialon ceramics
(Kluwer Academic Publ, 2000)Sialon ceramics were discovered simultaneously (but independently) in late 1971 at Newcastle University and also at the Toyota Research Laboratories in Japan. During the 30 years since their original discovery, the Newcastle ... -
Novel developments in a-SiAION ceramics
(2000)Densification and stabilization of ct-sialon ceramics have been investigated by using oxides of large cations (Sr2+, La3+, Ce3+, Nd3+) and their equimolar mixtures with calcium or ytterbium as a principal cation. All ...