Yayın tarihi için Makale Koleksiyonu listeleme
Toplam kayıt 71, listelenen: 1-20
-
The influence of silicoferrochromium fume on concrete properties
(1995)Silicoferrochromium fume containing 85.5% SiO 2 was investigated to determine whether it could be used as an admixture in concrete to increase its strength. The fume was added at the dosage rates of 0-5 % by weight of ... -
Preparation of Ce and Nd beta-sialon ceramics by alpha ->beta sialon transformation
(Inst Materials, 1997)It has previously been accepted that lanthanum and cerium do not form alpha-sialon structures because their ions are too large to enter the interstices in the structure. Recent work on heat treatment of rare earth densified ... -
Thermal stability of rare earth densified ?-sialon ceramics
(1997)Typical ?-sialon and mixed ?-ß sialon starting compositions were densified by either hot pressing or pressureless sintering using the oxides of Yb, Dy, Sm and Nd. The resulting materials were heat-treated at 1450°C for up ... -
The effect of heat-treatment on the performance of sub-micron SiCp-reinforced alpha-beta sialon composites .1. Preparation of agglomerate-free starting powders
(Elsevier Sci LTD, 1997)In order to prepare good-quality, dense, SiCp-reinforced alpha-beta sialon composites by hot-pressing, a technique was developed to prevent agglomeration of the SiC grains during powder processing. For this purpose, the ... -
The driving force for ??ß transformation in rare earth ? sialon ceramics
(1997)In-situ ??ß sialon transformation in rare earth sialon systems, which occurs when dense ?- and ?/ß-sialon samples are heat-treated at temperatures in the range 1300-1600°C was first observed five years ago, and has generated ... -
The effect of heat-treatment on the performance of sub-micron SiCp-reinforced alpha-beta sialon composites .2. Heat-treatment studies
(Elsevier Sci LTD, 1997)The effects of heat-treatment on alpha --> beta sialon transformation in dense, agglomerate-free Ln-sialon/SiCp(Ln=Nd,Yb) composites are reported. The stability of the alpha-sialon phase is not only dependent on the ... -
Interphase boundaries between hexagonal boron nitride and beta silicon nitride in silicon nitride-silicon carbide particulate composites
(1997)Inter phase boundaries between hexagonal boron nitride and Q-Si3N4 in hot isostatically pressed Si3N4-SiC particulate composites, in which boron nitride appears as a trace contaminant, have been examined using high resolution ... -
Optimization and improvement of sialon ceramics with new heat treatment techniques
(1997)Sialons are of interest for use as engineering materials for high temperature (>1000°C) applications becuase they retain good mechanical properties at these temperatures, whereas competing metallic materials are weak and ... -
Microstructural characterization of surface layers formed on a low alloy steel during erosion - oxidation in a fluidized bed
(Chapman Hall LTD, 1997)Low alloy steel specimens were subjected to erosion-oxidation in a simulated fluidized bed environ ment in the range 100-600 degrees C. Transmission electron microscopy was carried out on the surfaces which experienced ... -
Effect of starting composition, type of rare earth sintering additive and amount of liquid phase on alpha reversible arrow beta sialon transformation
(Elsevier Sci LTD, 1997)Five different alpha-beta sialon and alpha-sialon compositions have been prepared using different rare earth oxide additives namely, neodymium, samarium, dysprosium and ytterbium., Post-sintering heat treatments have been ... -
Effect of starting composition, type of rare earth sintering additive and amount of liquid phase on ? ? ß sialon transformation
(1997)Five different ?-ß sialon and ?-sialon compositions have been prepared using different rare earth oxide additives namely, neodymium, samarium, dysprosium and ytterbium. Post-sintering heat treatments have been carried out ... -
The effect of heat-treatment on the performance of submicron SiCp-reinforced ?-ß sialon composites: III. Mechanical properties
(Elsevier BV, 1997)Agglomerate-free SiCp-reinforced Ln-sialon (Ln=Nd and Yb) composites were fabricated by hot-pressing and by pressureless sintering to evaluate the improvement in microstructure and mechanical properties that could be ... -
The effect of heat-treatment on the performance of sub-micron SiCp-reinforced alpha-beta sialon composites .3. Mechanical properties
(Elsevier Sci LTD, 1997)Agglomerate-free SiCp-reinforced Ln-sialon (Ln=Nd and Yb) composites were fabricated by hot-pressing and by pressureless sintering to evaluate the improvement in microstructure and mechanical properties that could be ... -
Influence of sample thickness on the performance of photostrictive ceramics
(Amer Inst Physics, 1998)Ferroelectric materials with high photovoltaic properties are of interest for new optical devices such as photostrictive ceramic actuators. However, fabrication of these devices requires development of materials exhibiting ... -
An ultrasonic motor using a metal-ceramic composite actuator generating torsional displacement
(Japan J Applied Physics, 1998)An ultrasonic motor composed of three components; a stator, a rotor and a ball bearing is proposed. The stator is made of an active piezoelectric ring, poled in the thickness direction and bonded with two windmill-like ... -
Cyclic crack growth behaviour of two nickel base turbine disc alloys
(Kluwer Academic Publ, 1998)The high temperature fatigue crack growth behaviour of the nickel base superalloys Alloy 718 and Rene 95 (specimen thickness = 4.1 mm) were investigated and compared with each other. Fatigue crack propagation (FCP) tests ... -
Effect of electrolytes on sanitaryware slip
(Amer Ceramic Soc, 1999)Slip viscosity is used widely in controlling ceramic casting slip. The viscosity of slip changes with the amount and type of electrolyte. -
Use of perlite in wall tile production
(Amer Ceramic Soc, 1999)Raw perlite was added to monoporous tile bodies in different proportions. Their mechanical, physical and thermal characteristics were compared to ones having no perlite. Adding perlite to wall tile bodies offers both weight ... -
Preparation of multiple-cation alpha-SiAlON ceramics containing lanthanum
(Amer Ceramic Soc, 1999)Until recently, it was accepted that Ce3+ cations, with an ionic radius (r) of 1.03 Angstrom, were too large to form an alpha-SiAlON structure. However, more-recent studies have shown that cerium cations can be incorporated ... -
Preparation of multiple-cation ?-SiAlON ceramics containing lanthanum
(1999)Until recently, it was accepted that Ce 3+ cations, with an ionic radius (r) of 1.03 Å, were too large to form an ?-SiAlON structure. However, more-recent studies have shown that cerium cations can be incorporated into ...