Yayıncı "Australian Ceramic Society" Araştırma Çıktıları | TR-Dizin | WoS | Scopus | PubMed için listeleme
Toplam kayıt 11, listelenen: 1-11
-
Characterization of the interfaces formed at the silicon nitride superalloy joints
(Australian Ceramic Society, 2017)In this study, silicon nitride ceramics (Si3N4) were joined by using a capacitor discharge technique with an Inconel 718 superalloy interlayer and heat-treated in order to determine possible reactions between these two ... -
Corrosion behavior of MgO-MgAl2O4-FeAl2O4 composite refractory materials
(Australian Ceramic Society, 2017)This paper investigated the corrosion behavior of refractory materials that were produced by incorporating hercynite (FeAl2O4, H) at different ratios into MgO-MgAl2O4 (spinel, S). Meanwhile, the values of density and open ... -
Development of using local raw materials deposits in Eskisehir region, Turkey
(Australian Ceramic Society, 2017)Local clayey raw materials and feldspathic rocks of Eskisehir sources were characterized, and its influence in facade cladding tile compositions was evaluated. Dilatometric studies for disclosing peak firing temperatures ... -
The Effect of Porosity and Glassy Phase Amount of Porcelain Tiles on Ultrasonic Velocity
(Australian Ceramic Society, 2015)Non-destructive testing (NDT) has been playing critical role in processing, testing and structural evaluation of materials. Ultrasonic testing is a widely used characterization method in non-destructive testing (NDT). The ... -
Effects of Alumina on Porcelain Insulators
(Australian Ceramic Society, 2016)This study was conducted under both industrial and laboratory conditions for improving material properties (i.e. mechanical and electrical) of electroporcelain bodies produced by porcelain insulator factories in Turkey. ... -
Investigation of the Strength of Floor Tiles by Using An Experimental Design Method
(Australian Ceramic Society, 2015)The main objective of this work is to determine the main parameters affecting the strength properties of floor tiles. For this purpose, the effect of various ratios of the components in the Seger formulation on fast firing ... -
Investigation properties of BaO/RO-Al2O3-R2O3-B2O3-SiO2 glass-ceramic sealants for solid oxide fuel cell
(Australian Ceramic Society, 2017)Glass-ceramics are commonly used as sealing materials for planar solid oxide fuel cells (SOFCs). The major requirements of stack and module builders for these materials are the stability of the coefficient of thermal ... -
Pyroplastic deformation behavior of vitreous porcelain bodies in presence of spodumene
(Australian Ceramic Society, 2017)Pyroplastic deformation tendency of vitreous body compositions is a major production problem. In this work, a vitreous sanitaryware body composition (ST) which was developed in a previous work was taken as standard, and ... -
Roles of CaO, MgO and SiO2 on crystallization and microstructure development in diopside-based glass-ceramic glazes under industrial fast-firing condition
(Australian Ceramic Society, 2017)The research objective of the study was to increase the current understanding about how oxide compositions (CaO, MgO and SiO2 ratios) influence the (1) crystallization behaviour of starting frits, and subsequently (2) ... -
Slate rock waste as a ceramic raw material
(Australian Ceramic Society, 2015)In this study, the use of slate wastes as a glaze raw material was evaluated. In the first stage, chemical (XRF), mineralogical (XRD) and thermal microscopy analyses, grain size distribution, and color and melting ... -
Utilization of Magnesite Host Rocks in Wall Tile
(Australian Ceramic Society, 2015)The aim of this work is to search the usage of magnesite host rocks from the magnesite deposits of Eskisehir (Turkey) as a raw material in wall tile body. Two different magnesite host rock samples were characterized and ...